Type
BA & BB consists of two concentric tubes with rubber in between. The bushes are designed to absorb radial, axial and torsional loads. The rubber absorbs loads and requires no lubrication or maintenance.
Type
BD
Type
BD is a conical semi-bonded bush designed to withstand exceptionally large
axial and radial loads. In addition, it has been developed to allow conical
and torsional movements. Type BD functions as a teeter bearing in large
wind tubines.
Type DH
Type
DH is designed to handle high radial loads. It is usually employed in
heavy machinery such as construction and agricultural machinery, as well
as in couplings.
Type DJ
Type
DJ is a special vibration mount designed to absorb exceptionally
large radial and axial loads. Developed for wind turbines and especially for wind turbines with integrated hub, gear and generator.
Type FD
Type
FD is a cylindrical rubber bump-stop damper mounted on a quadratic base
plate. The damper is integrated in the same turbine as our BD teeter bearing.
Type GG
Type
GG is a mount designed for a wide range of applications. Vertical deflection is not affected by assembly. The mount is fully captive. Type GG is significantly
more stiff radially than axially. This is ideal where a stable setup is required.
Type GH
Type
GH is designed to provide vertical deflection and good stability.
Type GH benefits from a low installation height and is simple to assemble.
The metal coating provides effective protection against oil and chemicals. The mount is fully captive. Can be supplied with or without height adjustable devices.
Type SC
Type
SC is a small cylindrical vibration damper consisting of two steel discs with rubber vulcanized in between. The damper can absorb both compressive and shear loads. Type SC is recommended for stationary installations where easy installation is essential. Applications in fans, electric motors, pumps,
compressors, etc.
